V Type Trailer

Home / V Type Trailer

V Type Trailer

TECHNICAL SPECIFICATIONS AND FEATURES
MODEL : THREE AXLE 30 M3 CAPACİTY SEMİ-TRAİLER
VOLUME: 30m3
BRAND : METSAN SİLOBAS
SHEET MATERIAL: ST 37
TYPE: V TYPE BOTTOM DISCHARGE
TANK TICKNESS : 4 MM
WORKING PRESSURE: 2 BAR
TEST PRESSURE: 2,6 BAR
DISCHARGE TIME: 35 min/ 1000 kgTANK EQUIPMENT
2 MENHOL COVERS OF 450 mm DİAMETRE, RESİSTANT TO TEST PRESSURE
1 CEMENT SPHERICAL DİSCHARGE VALVE 100 MM
1 SPHERİCAL JET AİR VALVE FOR QUİCK DİSCHARGE
1 DİSCHARGE SYSTEM ON THE LEFT SİDE OF THE TANK 4”
1 SAFETY VALVE ADJUSTED FOR 2,5 BAR
INTERNAL DISCHARGE HOSE AIR CHANNEL SYSTEM PROVIDING IMPORTED FLOW
PROPERTİES
DRIVELINE
AIR SUSPENSION
EBS (WABCO) 2S/2M
AXLE LIFTING SYSTEM THAT CONTROLLED FROM THE VEHICLE.
WEİGHT CONTROL VALVE, DOUBLE LINE BRAKE SYSTEM WITH FILTER
6 PIECES OF SHOCK ABSORBER (SUSPENSION)
AUTOMATIC BRAKE ADJUSTER
2 PIECES OF SPRING CHAMBER 1 PIECE OF SPARE TIRE CARRIER
LIGHT TYPE PLASTIC MUDGUARD
2 PIECES OF SLUDGE TRAP MATS
3 PIECES OF AIR SUSPENSION AXLE GROUP (KOC)
TIRES 385/65 R22, 5 (BRIDGESTONE) BRAND IS 6+1 UNITS ELECTRIC SYSTEM
ACCORDANCE WITH TURKEY AND EU STANDARDS
24 V ELECTRICAL INSTALLATIONS (ECC NORMS)
2 PIECES OF 7 POSITION E CERTIFICATED REAR STOP LAMP
4 PIECES OF NUMBER PLATE LIGHTS
4 PIECES OF SIDE LAMPS
2 PIECES OF HEAD LIGHTS (FRONT) 4 PIECES OF LAMPS TOP OF THE TANKS AND
BOTTOM
2 PIECES OF HEAD LIGHTS (BACK)
NIGHT VISION OUTDOOR LIGHTS
SPEED PLATES
REFLECTORS
BOTH THE TANK AND SIDE REFLECTORS ARCHES ACROSS PAINT
2 coats of epoxy primer 2 coats of acrylic paint
COLOR
It will be specified according to customer request
WARRANTY
1 YEAR FOR PRODUCTİON FAULTS OF PRODUCTS PRODUCED BY MANUFACTURER
ACCESSORIES
1 PCS ELECTRİC COMPRESSOR(7200L/DK)
1 PCS OF DİSCHARGE HOSE OF 4” DİAMETER 6 METRE LENGTHS
1 PCS TYPE PLATFORM WALKING ROAD
PNEUMATIC LIFTING RAILING
1 PIECES OVER TANK MANOMETER
GUIDE SHOCKER ON THE LEFT SIDE OF THE TANK
MANOMATER ON THE LEFT SIDE OF THE TANK
DISCHARGE VALVE ON THE LEFT SIDE OF THE TANKDISCHARGE VALVE IN THE HOSE
2 PIECES OF EQUIPMENT CABINET IN TANK
1 PIECE SIDE LADDER
1 PIECES OF TWO SPEED JOST TYPE MECHANICAL STAND
1 PIECES OF JOST TYPE 2” KING PIN ( ACCORDING TO SAE STANDARTS)
1 PIECES OF WATER TANK
1 PIECES OF FIRE BOX
CHASSIS (ST Quality)
Lowbed Semitrailer has been produced in welding constructions with gas metal
arc welding as”I” crossing from resistant steel considering overloads proper to
capacity and intended usage.
GOOSE NECK Will be manufactured from the same chasses material
AXLE SHAFT
- 3 axle shafts with the capacity of 12 tons, Turkish Brand axles are used
1 unit axle is self steering - 1 unit axle is lifting
- There are brake shoes and heavy brake levers suitable for TSE norms
SUSPENSION
- Parabolic double deck flat type springs and dashpots
- 813-881 belows
ELEVATING FRONT AXLE SHAFT
- Remote operated elevating system for front axle shaft in cabin
TIRES AND RIMS
-245 70 R17,5 tires 12+1 unit Bridgestone-Lassa-Pirelli Brand
ELECTRICAL EQUIPMENT
- It is suitable forSAE standards and Tüv regulations
- Electricity is provided by 7 pin plug from vehicle
- There are necessary traffic advisory and stoplights on both sides
- There are back lights, brake lights, license plate lamps, trailer reflectors and
warning lights on the sides
BRAKE EQUIPMENT
- 71/320/ewg ff brake system according to EC standards.
- Wabco Brand ABS-EBS brake system
- Automatic slacks, 4 spring brake chambers and 2 service brake chambers.
- RSS that provides safe driving systemagainst 2S / 2M EBS
KING-PIN: Steel king-pin which is 2” according to DIN 74080 standards and 3½”
42 CRMO4 according to DIN 74083 standards are used
RAMP
Width : 800mm
Length : 4300 mm foldable hydraulic type rampLEGS: OMS Brand Two speed, telescopic,
mechanical conveyor legs, with the capacity of 25 tons
PAINT:2 coats of epoxy primer 2 coats of acrylic paint
COLOR: It will be specified according to customer request
STANDARD ACCESSORIES
- 1 Unit tool boxes
- Plastic water tank
- Aluminum bike impact absorber
- 2 Unit Tire Weld and Holder